OCTENN T570 KROME MT6582 4.4.2 MP.V1.2 Flash File
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : OCTENN
Device Model : T570_KROME
Device CPU : MT6582
Device IntName : T570_KROME
Device Version : 4.4.2
Device Compile : 12/1/2015 2:11:15 PM
Device Project : MP.V1.2
Device ExtInfo : T570_KROME
ScatCFG : BaseBand : MT6582 , Project : vh2807_w_emmc_gps_coclock_a5003_oct , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled
Setting : HW verify : Enabled
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC supported by BootLoader!
BL : BatteryLevel : 3663 mV
BL : BatteryLevel Ok
BL : Flash Pre-Erase
Total blocks to Erase : 2
Erase : 0x0000000001400000-0x0000000000100000
Erase : 0x0000000003100000-0x00000001BF600000
Flash Pre-Erase Done, time used : 00:00:00
SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ...
Use : preloader_vh2807_w_emmc_gps_coclock_a5003_octenn_
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : FFFFFFFF
PartErr : Not initialized , will update PMT now ...
Repartition Done!
Use FLN Mode
Processing : Flash Write
Flash now : MBR
Image Flash Ok
Flash now : EBR1
Image Flash Ok
Flash now : UBOOT
Image Flash Ok
Flash now : BOOTIMG
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : SEC_RO
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : ANDROID
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USRDATA
Image Flash Ok
Flash Write Done, time used : 00:01:34
Processing : Verify
Verify Passed : MBR
Verify Passed : EBR1
Verify Passed : UBOOT
Verify Passed : BOOTIMG
Verify Passed : RECOVERY
Verify Passed : SEC_RO
Verify Passed : LOGO
Verify Passed : ANDROID
Verify Passed : CACHE
Verify Passed : USRDATA
Data Verify Done, time used : 00:00:38
Update Mirror PMT
Update Done!
Update RomInfo done
Done!
Elapsed: 00:02:33
Reconnect Power/Cable!
--------------------------------------------------------------------------------------------------------------------------
Sp flash Tool User guide
Follow Tutorial Instraction
Step 1: Download the firmware to your computer.
Step 2: Extract the file on your computer’s drive
Step 3: Download the correct USB driver
Step 4: Extract the file
Step 5: Install the USB Driver.
Step 6: Download SP Flash Tool
Step 7: Run sp flash tool.
Step 8: Load scatter files from extracted firmware folder
Step 9: Connect your Device using USB Cable.
Step 10:Now Click the Download / upgrade firmntb of SP flash tool to start flashing.
Step 11:And wait for the process to finish and please do not unplug your device before finishing the process.
Step 12:A green ring display for flash successes will appear at the top
passward plz
ReplyDelete